Unconventional Breakfast Switch - David Perez

  For my unconventional switch, I decided to integrate the common dining table set of a fork and knife into my circuit. The list of materials includes my laptop and a circuit playground to act as power, two pairs of alligator clips, three jumper cables, one breadboard, one 330 ohms resistor, one 100 ohms resistor, one iron fork, one iron butter knife and one yellow LED.

The alligator clips are connected to the circuit playground with the voltage connected to the fork and the ground connected to the butter knife. Two jumper cables are connected to the breadboard which contact with the fork and knife to complete the loop. The ends of these jumper cables are taped to the table. Simply placing the fork on the red wire and the knife on the black wire will complete the loop and power on the LED!