Unconventional Switch: Team 9 - Griffin Shields & Logan Burnett
From our 5-volt power source, the circuit playground, from
the VOUT side, we’ve used an alligator clip wire to connect it to a 100 ohm
resistor, and then with another alligator wire, we have connected the resistor
to a yellow 3v LED. Connected to the LED, (again, via an alligator clip wire)
is a dual button system comprising of first an actual button, alligator wired
to a metal key, which to complete the circuit must be physically applied to a
metal spoon, which has an alligator wire on the other end, acting as a
connection to the ground, closing the circuit. The full circuit looks like
Circuit playground > wire > resistor > wire > LED > wire >
button > wire > key > spoon > wire > back to playground.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.